NICOM800
It is widely used in radiator bottom or frame, set-top box, power supply and vehicle storage battery, charging pile, LED TV, LED lamps, RDRAM memory module, micro heat pipe radiator, RDRAM memory module and other products.
Book now
Telephone:0755-33137976
Product Details

Introduction

Nicom800 series heat conduction interface materials are used to fill the air gap between heating devices and heat sinks or metal bases. Their flexible and elastic characteristics enable them to be used to cover very uneven surfaces. Its excellent performance enables heat to be transmitted from the heating device or the whole PCB to the metal shell or diffusion plate, so as to improve the efficiency and service life of heating electronic components.

Features

  • Good thermal conductivity: 5.0w/mk
  • With self-adhesive without additional surface adhesive
  • Highly compressible, soft and elastic, suitable for low pressure applications
  • Various thickness options are available
 

 

Application

It is widely used in radiator bottom or frame, set-top box, power supply and vehicle storage battery, charging pile, LED TV, LED lamps, RDRAM memory module, micro heat pipe radiator, RDRAM memory module and other products.

Parameters

Characteristic table
Color gray Visual thermal volume 1 l/g-K ASTM C351
structure & amp; Ingredients ceramic filled silicone rubber & nbsp ********** dielectric constant 5.5 MHz ASTM D150
Thermal conductivity 5.0 W/mK ASTM D5470 Volume resistivity 5.0X1013 Ohm-meter ASTM D257
hardness 45 Shore 00 ASTM 2240 Operating temperature range   -40 To 160 ℃ **********
proportion 2.69g/cc ASTM D297 Total mass loss (TML) 0.45% ASTM E595
Thickness range      0.010"-0.200" 
(0.25mm-5.0mm)
ASTM D374 Fire rating 94 V0 UL E331100
 

Packaging

Standard thickness:

0.010" (0.25mm)、 0.020" (0.51mm)、 0.030" (0.76mm)、0.040" (1.02mm)、 0.050" (1.27mm)、 0.060" (1.52mm)、 0.070" (1.78mm)、0.080" (2.03mm)、0.090" (2.29mm)、0.100" (2.54mm)、0.110" (2.79mm)、0.120" (3.05mm)、0.130" (3.30mm)、0.140" (3.56mm)、0.150" (3.81mm)、0.160" (4.06mm)、0.170" (4.32mm)、0.180" (4.57mm)、0.190" (4.83mm)、0.200" (5.08mm)

If you need different thickness, please contact our company

reinforcing material:

Nicom series sheets can be reinforced with glass fiber

standard sheet size:

8" x 16"(203mm x 406mm)、16" x 18"(406mm x 457mm)。

Nicom series can be die cut into different shapes

pressure sensitive adhesive:

"A1" The tail code is marked as single-sided viscosity

"A2" The tail code is marked as double-sided viscosity

 
 
 
Please leave your contact information!
Send Email!
Shenzhen YHD Electronics Co., Ltd

0755-33137976

SUCCESS SUBMIT!

OK

Mail sent!

OK

SUCCESS SUBMIT!

OK