Introduction
Fhb800k series thermal conductive insulating material, thermal conductive silicone tape product is an insulating gasket with high thermal conductivity and high dielectric constant coated with ceramic mixed filling phase low melting point material on polyimide film
Features
- The surface is soft
- Good conductivity, good dielectric strength
- High voltage insulation, low thermal resistance
- Tear and puncture resistance
Features
It is widely used in power conversion equipment, power semiconductor devices, audio-visual products, automobile control devices, motor control equipment, ordinary high-voltage junction surface and other equipment.
Parameters
Characteristic table | |||||
Product name | FHB806K | FHB808K | FHB810K | Test Method | |
colour | Light amber | Visual | |||
thickness | 0.001"/0.0254mm | 0.001"/0.0254mm | 0.002"/0.0508mm | ASTM D374 | |
thickness | 0.005"/0.127mm | 0.007"/0.178mm | 0.008"/0.203mm | ASTM D374 | |
Total thickness | 0.006"/0.152mm | 0.008"/0.203mm | 0.010"/0.254mm | ASTM D374 | |
proportion | 2.0 g/cc | ASTM D297 | |||
Tensile strength | >13.5 Kpsi | >13.5 Kpsi | >17.8 Kpsi | ASTM D412 | |
Operating temperature range | (-58 to 266℉) / (-50 to 130℃) | *** | |||
breakdown voltage | >4000 VAC | >5000 VAC | >6000 VAC | ASTM D149 | |
Dielectric constant | 1.8 MHz | ASTM D150 | |||
Volume resistivity | 3.5X1013Ohm-meter | ASTM D257 | |||
UL safety regulations | 94 V0 | equivalent UL | |||
Thermal conductivity | 1.3 W/m-K | ||||
Thermal impedance@50psi | 0.12℃-in²/W | 0.16℃-in²/W | 0.21℃-in²/W | ASTM D5470 |
-
Standard thickness:
0.004"(0102mm);0.005"(0.127mm); 0.006"(0.152mm)。
If you need different thickness, please contact our company.
Standard sheet size:
10" x 100"(254mm x 30.48M)。
FHB series can be die cut into different shapes.
Pressure sensitive adhesive:
"A1" The tail code is marked as single-sided viscosity
Reinforcing material:
Fhb800k series plate replaces polyimide film as reinforcing material。
SUCCESS SUBMIT!
OKMail sent!
OKSUCCESS SUBMIT!
OK