NICOM800HP
Nicom800hp series heat conduction interface materials are used to fill the air gap between heating devices and heat sinks or metal bases. Their flexible and elastic characteristics enable them to be used to cover very uneven surfaces. Its excellent performance enables heat to be transmitted from the heating device or the whole PCB to the metal shell or diffusion plate, so as to improve the efficiency and service life of heating electronic components.
Book now
Telephone:0755-33137976
Product Details

Introduction

Nicom800hp series heat conduction interface materials are used to fill the air gap between heating devices and heat sinks or metal bases. Their flexible and elastic characteristics enable them to be used to cover very uneven surfaces. Its excellent performance enables heat to be transmitted from the heating device or the whole PCB to the metal shell or diffusion plate, so as to improve the efficiency and service life of heating electronic components.

 

Features

 
  • Good thermal conductivity: 12.0w/mk
  • With self-adhesive without additional surface adhesive
  • Highly compressible, soft and elastic, suitable for low pressure applications
  • The product can work stably at - 40 ~ 160 ℃ and under low pressure
 

 

Application

It is widely used in radiator bottom or frame, set-top box, power supply and vehicle storage battery, charging pile, LED TV, LED lamps, RDRAM memory module, micro heat pipe radiator, RDRAM memory module and other products.

 

Parameters

 Characteristics of nicom800hp series
colour grey Visual Breakdown voltage (t = above 1mm) ≥5500 VAC ASTM D149
structure&Ingredients Ceramic filled silicone rubber ********** Dielectric constant 4.5 @1MHz ASTM D150
Thermal conductivity 12.0 W/mK ASTM D5470 Volume resistivity ≥1.0X1012 Ohm-cm ASTM D257
ISO22007-2.2
hardness(thickness≥0.75mm) 35  Shore 00 ASTM 2240 Operating temperature range   -40 To 160 ℃ **********
hardness(<0.75mm) 65  Shore 00
density 3.55g/cm3 ASTM D792 Total mass loss (TML) 0.32% ASTM E595
Thickness range

     0.030"-0.200" 

 (0.75mm-5.0mm)

ASTM D374 Fire rating 94 V0 UL E331100
 

Packaging

Standard thickness:

0.030" (0.75mm)、 0.200" (5.0mm)

If you need different thickness, please contact our company.

Reinforcement material:

Nicom series sheets can be reinforced with glass fiber.

Standard sheet size:

8" x 16"(203mm x 406mm)

Nicom series can be die cut into different shapes.

Pressure sensitive adhesive:

" A1" The tail code is marked as single-sided viscosity.

" A2" The tail code is marked as double-sided viscosity.

 
 
 
Please leave your contact information!
Send Email!
Shenzhen YHD Electronics Co., Ltd

0755-33137976

SUCCESS SUBMIT!

OK

Mail sent!

OK

SUCCESS SUBMIT!

OK